Split pin ISO/WN 1234 steel zinc-plated
ISO/WN 1234 zinc plated steel
SPLTPIN-ISO1234-(A2K)-1X20
Register now and access more than 20,000 products
Nominal size d1 = 3.5 mm/4.5 mm/5.5 mm/7 mm not standardised according to ISO 1234
Replaces DIN 94
 | |
Nominal diameter (d1) | 1 mm |
Length (l1) | 20 mm |
Longitudinal external diameter of ring (b) | 3.00 mm |
Transverse external diameter of ring (c) | 1.80 mm |
Length between two pins of a splint (a) | 1.60 mm |
Standards | ISO 1234 |
Material | Steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Würth Catalogue (1)
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Twist drill bit HSS DIN 338 TYPE RN
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Pan Head screw with hexalobular head ISO 14583, steel 4.8, zinc-plated, blue passivated (A2K)
Lock for cable tie tightening pliers
Screw-on fastening base – countersunk head
Raised countersunk tapping screw, shape C with Z recessed head DIN 7981, steel, zinc-plated, blue passivated (A2K), PZ drive, round head, shape C
Brass spacer stud
Flat washer For hexagon head bolts and nuts
Screw-on fastening base – flame-retardant/-V0
Slotted headless screw with flat point DIN 427, A1 stainless steel, plain