Spring plunger with thrust pin
Spring plunger, thrust pin, stainless steel
SPGPLNG-PIN-A1-M4X15
Register now and access more than 20,000 products
- With normal and enhanced spring force
Datasheets(X)
Spring-loaded pressure pieces are used as locking mechanisms as well as hold-down and lift-off pins.
 | |
Material of sleeve | Stainless steel A1, 1.4305 |
Material of bolt | Stainless steel C1, 1.4034 |
Material of spring | Stainless steel A2, 1.4310 |
Surface | Plain |
RoHS-compliant | Yes |
Drive type | Hexagon socket |
Thread type x nominal diameter (d1) | M4 |
Length (l1) | 15 mm |
Bolt diameter (d2) | 1.5 mm |
Bolt height (h1) | 1.5 mm |
Internal drive (s) | HS1.3 |
Spring force start (F1) | 5 N |
Spring force end (F2) | 16 N |
Design | Standard |
Product weight (per item) | 0.820 g |
Last viewed
Single wire seal (SEAL) For uninsulated cable connector
Sealing ring
Pan head screw with H cross recess DIN 7985, steel 4.8, zinc-plated, blue passivated (A2K)
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Cable grommet TPE
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Precision gauge vernier calliper
Countersunk head screw with hexagon socket ISO 10642, A4-070 stainless steel, plain
Cone grease nipple DIN 71412, shape A, straight, zinc plated steel, inch
JIS B1111 steel 4T zinc plated H