Steel zinc plated countersunk milling head H inch
Steel zinc plated countersunk milling head H inch
SCR-DBIT-WING-H2-(A2K)-10G-16X32
Art.-no. 3665040332
EAN 4062856740338
Register now and access more than 20,000 products
Datasheets(X)
Material | Steel, case-hardened |
Surface | Zinc plated |
RoHS-compliant | Yes |
Nominal diameter (d1) | 4.8 mm |
Length (l1) | 32 mm |
Head diameter (dk) | 9.5 mm |
Head height (k1) | 3 mm |
Internal drive | H2 |
Head type | Countersunk milling head |
Thread type | Self-tapping screw thread |
Last viewed
Cable tie BT -69 PA
WÜPLAST® pan head screw with Z Phillips head WN 1412, steel 10.9, zinc-plated, transparent passivated (A3K)
Flat washer without chamfer ISO 7089 A2 stainless steel, 200 HV
Adhesive lubricant HHS® 1000
DUO wire end ferrule with plastic sleeve
Adhesive base ABM100 PA
Nozzle For lever riveter HNG 26/28
Hexagonal bolt with shank ISO 4014, 8.8 steel with silver zinc-flake coating (ZFSHL)
Pan head screw with H cross recess DIN 7985, steel 4.8, zinc-plated, blue passivated (A2K)
Hexagon cap nut, low profile DIN 917, steel 6, zinc-plated, blue passivated (A2K)