Tapping screw, flat head DIN 7981, zinc-plated steel, blue passivated (A2K), TX round head, shape C
DIN 7981 steel zinc-plated round head TX shape C
SCR-PANHD-DIN7981-C-TX20-(A2K)-3,9X25
Register now and access more than 20,000 products
Datasheets(X)
 | |
Material | Steel |
Surface | Zinc plated |
Form | C |
Nominal diameter (d1) | 3.9 mm |
Length (l1) | 25 mm |
Head diameter (dk) | 7.5 mm |
Head height (k1) | 2.8 mm |
Internal drive | TX20 |
DIN | 7981 |
Head type | Pan head |
Head details | 0 - not applicable |
Declaration of performance (EU-CPR) | No |
Standards | DIN 7981 |
Thread type | Self-tapping screw thread |
Thread design | Full thread |
Shape of tip | C |
| Thread size | St 2.2 | St 2.9 | St 3.5 | St 3.9 | St 4.2 | St 4.8 | St 5.5 | St 6.3 | St 8 | St 9.5 |
| Min. sheet thickness (mm) | 0,8 | 1,1 | 1,3 | 1,3 | 1,4 | 1,6 | 1,8 | 1,8 | 2,1 | 2,1 |
| Max. sheet thickness (mm) | 1,8 | 2,2 | 2,8 | 3 | 3,5 | 4 | 4,5 | 5 | 6,5 | 7,5 |
| Pre-drilling diameter (mm) | 1,2 | 2,1 | 2,6 | 2,8 | 3,0 | 3,5 | 4,1 | 4,7 | 6,1 | 7,7 |
Last viewed
Cable tie tightening pliers, pneumatic Extra-wide
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Cable grommet TPE
Hole puncher with splitting punch Metric ISO sizes in accordance with EN 50262
Cylindrical pin, hardened DIN 6325, steel, plain
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Pan head tapping screw, C shape with H recessed head DIN 7981, steel, zinc-plated, blue passivated (A2K), shape C, with tip
Countersunk screw with hexagon socket head
Electric soldering iron with nickel-plated copper tip and safety plug for fine soldering work