Thread die HSS DIN EN 22568 for standard metric ISO threads
Threaded die HSS DIN 13-1
THRDIE-HSS-DIN223-M5
Register now and access more than 20,000 products
Two-sided cut
- Can be used on both sides
- Threads can be cut in one process
- Easy cutting and excellent chip removal in cutting direction
High edge retention
Datasheets(X)
The die is placed in the die holder at the height of the middle screw. The screws are tightened with a screwdriver. The die is placed vertically on the workpiece. Can be used on both sides. When cutting, sufficient cutting oil must be added. After two revolutions, the cut can be broken by briefly turning back.
Type description | For metric ISO thread DIN 13 |
Cutting material | HSS |
Surface | Plain |
Thread type | Metric thread |
Form | B |
Tolerance class | 6g |
Thread type x nominal diameter | M5 |
Pitch | 0.8 mm |
Outer diameter | 20 mm |
Height | 7 mm |
Material to be processed | Steel, Cast iron |
Last viewed
Cable ties with metal latch closure, heat-stabilised and weather-resistant – industrial quality
Adhesive-free plaster, blue, elastic, latex-free For all wounds and cuts
Sealing ring, copper filling seal shape C
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Half-shell trapezoidal crimping insert
Twist drill bit HSS DIN 338 TYPE RN
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Plus Quadro-L Vario hammer drill bit
Adhesive base for cable ties, screw-on 28.6x28.6 mm – industrial quality
Wire end ferrule with plastic sleeve