Turnbuckle sleeve, open form
DIN 1480 steel zinc plated
TURNBCKLNUT-DIN1480-(A2K)-M12X125
Register now and access more than 20,000 products
Datasheets(X)
Wind and stabilisation braces in steel construction
 | |
Standards | DIN 1480 |
Material | Steel |
Surface | Zinc plated |
Form | Open |
RoHS-compliant | Yes |
Thread type x nominal diameter (D) | M12 |
Turnbuckle-sleeve width (external) (d1) | 34 mm |
Outer diameter of sleeve end (d2) | 21 mm |
Turnbuckle-sleeve length (l1) | 125 mm |
Thread length (metric thread) (m1) | 21 mm |
Last viewed
Combination wrench, inch with POWERDRIV®
Electrical insulating tape
Twist drill bit HSS DIN 338 TYPE RN
Single wire seal (SEAL) For uninsulated cable connector
Blind rivet, open, with break mandrel and flat head ISO 15979, dome head, steel/steel
Pan Head screw with hexalobular head ISO 14583, steel 4.8, zinc-plated, blue passivated (A2K)
Cable ties with metal latch closure – industrial quality
Countersunk slotted head screw, Z DIN 965, steel 4.8, zinc-plated, blue passivated (A2K)
Chuck with lock nut
Pan head screw with H cross recess DIN 7985, steel 4.8, zinc-plated, blue passivated (A2K)