Type-V angle connector with slotted hole - ANGL-WOCON-V-LONGHOLE-95MM

Type-V angle connector with slotted hole - ANGL-WOCON-V-LONGHOLE-95MM - 1

Type-V angle connector with slotted hole - ANGL-WOCON-V-LONGHOLE-95MM - 2

Type-V angle connector with slotted hole

Name: Type-V angle connector with slotted hole
Brand: Würth
SKU: 5390210095

Angle connector type V with long hole
ANGL-WOCON-V-LONGHOLE-95MM

Art.-no. 5390210095

EAN 4052703998388

All versions

Similar products

Prices for customers after login

Type-V angle connector with slotted hole

Art.-no. 5390210095

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service: +603-8021 0200

Special reinforced angle connector for load-bearing wood/wood and wood/concrete joints for base anchorage in timber structures. The slot in the base plate enables optimum adjustment during construction.

Extremely high load-bearing capacities

For versatile use in wood-wood and wood-concrete applications

Hot-dip galvanised sheets on both sides

Application in utilisation class 1.2 and 3 in line with EN 1995:2013

Proof of Performance

European Technical Evaluation

Notice

Partial nailing is permitted (see additional document: "Nailing patterns").

The general requirements of ETA 14/0274 and ETA 08/0183 must be observed.

The general requirements of the applicable anchor approval must be observed.

Load tables and detailed processing instructions can be found on the service page www.wuerth.de/holzverbinder.

Application area

European Technical Evaluation

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Tension anchor connection of wooden walls, supports or purlins to concrete or steel substrates.

Instructions

Suitable fasteners:

Comb/ribbed nails in line with EN 14592: ≥ 4.0 x 40 mm ribbed nails; ASSY 3.0 combination screws in line with ETA 11/0190: d = 12 mm

Bolts in accordance with manufacturer's specifications: d = 12 mm

Recommended dowels for anchoring in concrete d = 10 or 12 mm: W-BS; W-FAZ; W-VIZ; WIT-VM 250


Type	V slot
Width x height x depth	65 x 95 x 90 mm
Thickness	4 mm
Design	Without bar
Number of D 13 mm holes in subcarrier nJ/main carrier nH	0 + 0 PCS
Number of D 11 mm holes in main carrier nH	1 PCS
Number of D 11 mm holes in subcarrier nJ + main carrier nH	0 + 1 PCS
Elongated hole length/ elongated hole width	24.5 x 13.5 mm
Number of D 5 mm holes in subcarrier nJ + main carrier nH	9 + 2 PCS
Approval	ETA
Product weight (per item)	335.200 g
Material	Unalloyed quality steel, 1.0332
Surface	Hot dip galvanized
Material designation	DD11
Number of D 5 mm holes	13 PCS
Number of D 11 mm holes	1 PCS
Number of D 13 mm holes	0 PCS

Type V 65x285x90	9		char.	F_1,Rk = 13.70	Type V 65x285x90	9		char.	F_1,Rk = 27.50
			Short	F_1,Rd = 9.48				Short	F_1,Rd = 19.04
Type V-MH 65x137x90		1	char.	F_1,Rk = 2.90	Type V-MH 65x137x90		1	char.	F_1,Rk = 11.50
			Short	F_1,Rd = 2.01				Short	F_1,Rd = 7.96
Tensile force in anchor bolt for wood/concrete: F_B,Ed = 1.4 × F_1,Ed tensile force in anchor bolt for wood/wood: F_B,Ed = 1.3 × F_1,Ed					Tensile force in anchor bolt for wood/concrete: F_B,Ed = 0.7 × F_1,Ed tensile force in anchor bolt for wood/wood: F_B,Ed = 0.65 × F_1,Ed
	Characteristic load-bearing capacity and design values of the load-bearing capacity ("short") in load case F1 for angle bracket V slotted hole or round hole and V-MH as tension anchor in a purlin joint						Characteristic load-bearing capacity and design value of the load-bearing capacity ("short") in load case F1 for two angle brackets V slotted hole or round hole and V-MH as tension anchor in a purlin joint
Format in mm	Anchor nail 4x40 mm	ASSY 10x60 mm	KLED	Load-bearing capacity in kN		Format in mm	Anchor nail 4x40 mm	ASSY 10x60 mm	KLED	Load-bearing capacity in kN
Type V 65x95x90	9		char.	F_1,Rk = 13.70		Type V 65x95x90	9		char.	F_1,Rk = 27.40
			Short	_^F1,Rd = 9.48					Short	F_1,Rd = 18.97
Type V 65x135x90	14		char.	F_1,Rk = 21.20		Type V 65x135x90	14		char.	F_1,Rk = 42.40
			Short	F_1,Rd = 14.68					Short	F_1,Rd = 29.35
Type V 65x137x90		2	char.	F_1,Rk = 10.90		Type V 65x137x90		2	char.	F_1,Rk = 21.90
			Short	F_1,Rd = 7.55					Short	F_1,Rd = 15.25
Tensile force in anchor bolt for wood/concrete: F_B,Ed = 1.4 × F_1,Ed tensile force in anchor bolt for wood/wood: F_B,Ed = 1.3 × F_1,Ed						Tensile force in anchor bolt for wood/concrete: F_B,Ed =1, 0.7 × F_1,Ed tensile force in anchor bolt for wood/wood: F_B,Ed = 0.65 × F_1,Ed
Notes: For a 11 mm, 12 mm or 13.5 mm hole, a washer with t = 2.5 mm must be used As fasteners, 4x40 mm anchor nails in accordance with EN 14592 or 10x60/50 mm ASSY screws in accordance with ETA-11/0190 must be used. ETA 08/0214 specifications must be observed with respect to nail pattern. The prescribed nailing patterns must be used. The load-bearing capacities indicated are for coniferous wood with a characteristic density of ρ_k ≥ 350 kg/m³. The design value of the load-bearing capacity is calculated as follows: F_1,Rd = k_mod/γM × F1,Rk with M = 1.3. The design value of the tensile force in the anchor bolt FB,Ed must be calculated using the design value of the tensile force of a tension anchor F_1,Ed.

V-MH	65x137x90			10x60	10,9	2,90	2,14

Table F₅
Angle bracket type V		Art. no.	Width in cm	F_{5, wood,Rk} ⁵⁾ in kN; k_t,5
Angle bracket type V				Height in cm
Hole shape	WxHxD [mm]			12	14	16	18	22
Slotted or round hole	65x95x90	or		4.29 ; 2.16	4.58 ; 2.24	--- ; ---	4.68 ; 2.44	--- ; ---
				3.72 ; 2.05	3.81 ; 2.08	--- ; ---	3.98 ; 2.15	--- ; ---
				3.56 ; 2.01	3.61 ; 2.03	--- ; ---	3.70 ; 2.07	--- ; ---
Slotted or round hole	65x135x90	or		--- ; ---	--- ; ---	4.45 ; 1.94	4.94 ; 2.82	5.03 ; 4.50
				--- ; ---	--- ; ---	3.91 ; 2.02	3.98 ; 2.06	4.06 ; 2.04
				--- ; ---	--- ; ---	3.73 ; 1.94	3.77 ; 1.97	3.83 ; 2.02
V-MH	65x137x90			--- ; ---	--- ; ---	3.83 ; 1.70	3.73 ; 1.73	3.95 ; 2.04
			10	--- ; ---	--- ; ---	3.45 ; 1.61	3.55 ; 1.63	3.71 ; 1.65
			14	--- ; ---	--- ; ---	3.71 ; 1.65	3.34 ; 1.59	3.44 ; 1.61
⁵⁾ Loads F_4,d and F_5,d act on the upper edge of the connected component. Securing against twisting is not required.
ONE angle bracket type V per connection:
Note: If one angle bracket is used for each connection, the connected component must be secured against twisting.
TWO angle brackets type V per connection:
NOTE: These are guides for planning purposes. The values must be calculated for each project by authorised persons.

Round hole
V-MH	65x137x90	10x60	21,9	11,5	4,28	8,57
¹⁾ Only for purlin connections.			²⁾ Only for support connections.
³⁾ For effect of action F_4/5,d, the additional force F_1,d = F4_/5,d × e/b must be taken into account and, if necessary, proof of interaction must be provided. ⁴⁾ If one angle bracket is used for each connection, the connected component must be secured against twisting. ⁵⁾ Loads F_4,d and F_5,dact on the upper edge of the connected component. Securing against twisting is not required. ⁶⁾ Würth anchor nails 4x40 mm according to EN 14592 ⁷⁾ Würth ASSY screw 10x60/50 mm according to ETA-11/0190 For an 11 mm, 12 mm and 13.5 mm hole, a washer with t = 2.5 mm must be used. The specified load-bearing capacities apply to coniferous wood with 350 kg/m³ ≤ ρ_k ≤ 420 kg/m³. For wood with 290 ≤ ρ_k < 350 kg/m³, the specified load-bearing capacities for wood must be multiplied by the factor k_dens: Rated values of the load-bearing capacities: F_i,Rd= min {F_i,wood,Rd; F_i,steel,Rd} Failure of fasteners in wood: F_i,wood,Rd= k_mod / Ƴ_M,wood × F_i,wood,Rk with Ƴ_M,wood = 1.3 Steel failure of the connector: F_i,steel,Rd = F_i,steel,Rk/Ƴ_M,steel with Ƴ_M,steel = 1.0 For several simultaneous loads, the following condition must be met: The specified nailing patterns must be observed in accordance with the relevant ETA-08/0214. The bolt loads are calculated from the actions F_1,d , F_2/3,d and F_4/5,d Shear force per bolt for 1 or 2 brackets: Axial force per bolt for 2 brackets: Axial force per bolt for 1 bracket: kt,1 - value:
Note: These are guides for planning purposes. The values must be calculated for each project by authorised persons.

Required accessory:

Product

Description

Quantity

Price
/PU

Comb nail / anchor nail

RIDGNL-(A3K)-4X50MM

Art.-no. 0681940050

Galvanised steel, blue coated (A2K)

x 2000 pcs

Fixanchor W-FAZ/S

ANC-(W-FAZ/S)-(A2K)-125-M12X220

Art.-no. 0904521217

Bolt anchor for high loads in cracked and non-cracked concrete. Steel, zinc-plated

x 25 pcs

Fixanchor W-FAZ/S

ANC-(W-FAZ/S)-(A2K)-145-M12X240

Art.-no. 0904521218

Bolt anchor for high loads in cracked and non-cracked concrete. Steel, zinc-plated

x 20 pcs

Fixanchor W-FAZ/S

ANC-(W-FAZ/S)-(A2K)-160-M12X255

Art.-no. 0904521219

Bolt anchor for high loads in cracked and non-cracked concrete. Steel, zinc-plated

x 20 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).