Union nipple
Socket union brass
SKTUN-BRS-DN20-AG-G11/4IN
Register now and access more than 20,000 products
- Direct connection to a female thread, eliminating double nipples
- Only one screw connection per joint, resulting in greater safety and saving of a union nut and a seal
Datasheets(X)
For the connection of two stainless steel corrugated pipes
For connection to a female thread
Mounting is the same as for a union nut, i.e. slide a union nipple over the pipe, compress the pipe, place a gasket in-between and screw in.
 | |
Material | Brass |
Connection thread | ET G 1 1/4 inch |
DN nominal width | DN 25 |
Internal diameter | 33.2 mm |
Width across flats (SW) | 46 mm |
Length | 25 mm |
Last viewed
Rivet nut, multi-purpose, with countersunk head
Countersunk head screw with hexagon socket ISO 10642, A4-070 stainless steel, plain
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Twist drill bit assortment HSS DIN 338 SMART STEP, 25 pieces
Hammer drill bit cassette with SDS-plus drive arbor, Duo-S Vario 7 pieces
1/4 inch socket wrench insert, metric short
Screw-on fastening base
Cable ties with plastic latch, flame-retardant – industrial quality
Twist Drill bits HSS ASME B94.11M TYPE RN
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, A2-070 stainless steel, plain