Union nipple
Socket union brass
SKTUN-BRS-DN20-AG-G11/4IN
Register now and access more than 20,000 products
- Direct connection to a female thread, eliminating double nipples
- Only one screw connection per joint, resulting in greater safety and saving of a union nut and a seal
Datasheets(X)
For the connection of two stainless steel corrugated pipes
For connection to a female thread
Mounting is the same as for a union nut, i.e. slide a union nipple over the pipe, compress the pipe, place a gasket in-between and screw in.
 | |
Material | Brass |
Connection thread | ET G 1 1/4 inch |
DN nominal width | DN 25 |
Internal diameter | 33.2 mm |
Width across flats (SW) | 46 mm |
Length | 25 mm |
Last viewed
Flat connector contact Junior Power Timer (JPT) 2.8
Twist drill bits HSS DIN 338 type RN TIN head
Square wedge-shaped washer DIN 6917, 295-350 HV, hot-dip galvanised, wedge-shaped, for high-tensile prestressed bolt on I-profile
Pan Head screw with hexalobular head ISO 14583, A2-70 stainless steel, plain
Tungsten carbide bur with aluminium teeth
WÜPLAST® pan head screw with hexalobular drive WN 1452, steel 10.9, zinc-plated, transparent passivated (A3K)
Hexagon nut with fine thread DIN 934, steel I10I, zinc-nickel (P3E)
Twist drill bit HSCo DIN 338 MFD Speed
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain