Universal holder E 6.3 (1/4") With quick-change chuck
Univ. holder E 6.3 (1/4) quick-change chuck
HOLD-BIT-QCCHUK-1/4INX1/4IN-L51MM
Register now and access more than 20,000 products
- Non-magnetic holder for screws in metallic environment. Magnets would attract swarf.
- Quick-change chuck forms a strong connection between holder and bit Pushing the clamping bush forward slightly releases the latch mechanism and facilitates extremely rapid tool replacement.
Datasheets(X)
Drive | E 6.3 (1/4 inch) |
Drive type | Outer hexagon |
Tip size | 1/4 inch |
Tip type | Hexagon socket |
Length (L) | 51 mm |
Last viewed
Hexagon nut DIN EN 14399-4, steel 10Z, hot-dip galvanised, for high-strength structural bolting assemblies
Adhesive base for cable ties, screw-on 50.8x50.8 mm – industrial quality
Electrical insulating tape
Covering plug, type 11 Removable
Single wire seal (SEAL) For uninsulated cable connector
Hexalobular-type cheese head screw ISO 14579, A2-070 stainless steel, plain
Twist drill bit HSS DIN 338 TYPE RN
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Tool head, small design For crimping pliers
Hexagon nut, low profile DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)