Vernier callipers, digital
Digital vernier callipers Eco
CAL-DGT-(0-150MM)
Register now and access more than 20,000 products
- Measuring unit: Metric or inch, direct conversion
- LCD digital display 10 mm
- Data output RS 232 compatible
- Battery: 1.5 V silver oxide battery (SR44)
- Battery voltage monitor light on the display
- Automatic switch-off/5 min.
- Stainless steel, hardened and smoothed
- Measuring surfaces ground and lapped
- With locking screw
- Flat depth gauge
- Thread table on the reverse, depth gauge on the calliper
Delivered in plastic box.
Datasheets(X)
The callipers have two measuring arms on each side for measuring internal and external dimensions. The callipers also have a depth gauge that can be used e.g. for measuring bore holes. The callipers have a table on the reverse for looking up the diameter of core holes in thread cutting.
Absolute length measuring accuracy | 0.03 mm |
Max. length measuring range | 150 mm |
Length of jaw | 40 mm |
Last viewed
Pan head screw with H cross recess DIN 7985, steel 4.8, zinc-plated, blue passivated (A2K)
Quick-action coupling with hose connection series 2000 For Würth PVC hoses
Raised countersunk tapping screw, shape C with Z recessed head DIN 7981, steel, zinc-plated, blue passivated (A2K), PZ drive, round head, shape C
Pan Head screw with hexalobular head ISO 14583, steel 4.8, zinc-plated, blue passivated (A2K)
Flat washer with chamfer for high-strength fittings
Plus Quadro-L Vario hammer drill bit
Cable ties with metal latch closure – industrial quality
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Electrical insulating tape
Hexagonal bolt with flange DIN 6921, steel 8.8, zinc-plated, blue passivated (A2K)