W-VD-IG internally threaded sleeve, A4 stainless steel for W-VD bonded anchor capsule systems and WIT injection systems in uncracked concrete
Female thread sleeve W-VD-IG/A4 stainless steel A4
ANC-(W-VD-IG)-A4-M16
Register now and access more than 20,000 products
- Anchorage via bond between mortar, internally threaded sleeve base material
- Stainless steel A4 internally threaded sleeve in sizes (internal thread) M8, M10, M12 and M16
Datasheets(X)
W-VD-IG/A4 (stainless steel A4) can be used in dry indoor areas, outdoors (including in industrial atmospheres and coastal areas) or in wet rooms, provided that no particularly aggressive conditions are present.
Type description | W-VD-IG/A4 |
Anchor internal diameter metric | IT M16 |
Female-thread length | 40 mm |
Anchor diameter (d) | 22 mm |
Effective anchoring depth (h ef) | 120 mm |
Anchor length (l) (l) | 120 mm |
Nominal drill-bit diameter cartridge system (d 0) | 25 mm |
Drill hole depth (h 0) | 120 mm |
Surface | Plain |
Material | Stainless steel A4 |
Last viewed
Hexagon nut, low profile, with clamping piece (non-metal insert)
C 6.3 PH bit (1/4 inch)
Cable grommet TPE
Twist Drill bits HSS ASME B94.11M TYPE RN
Single wire seal (SEAL) For uninsulated cable connector
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, A2-070 stainless steel, plain
Adhesive base for cable ties, screw-on 25.4x25.4 mm – industrial quality
Turn-lock fastener mount
Hexagonal bolt
Ring bolt DIN 580, material: C15 E, zinc-plated steel, blue passivated (A2K)