WIT internally threaded sleeve, zinc-plated steel, without approval for bonded anchors in masonry
Female thread sleeve WIT steel zinc plated
ANC-(IG)-(A2K)-M6X50
Register now and access more than 20,000 products
Internally threaded sleeve - not approved for masonry
Unapproved
Datasheets(X)
CAD data (available after login)
Internally threaded sleeve WIT, zinc-plated steel can be used in dry indoor areas
Type description | Female thread sleeve WIT |
Female thread | 6 mm |
Length | 50 mm |
Min./max. required screw-in depth | 6-18 mm |
Nominal drill-bit diameter perforated sleeve (d 0) | 12 mm |
Effective anchoring depth perforated sleeve (h ef) | 50 mm |
Drill hole depth (h 0) | 55 mm |
Suitable for perforated sleeve | WIT-SH 12/50 |
Material | Steel |
Surface | Zinc plated |
Last viewed
Threaded rod DIN 976-1, brass, plain
Cylinder saw, HSS bimetal Longlife & Speed HSCo8
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Cable ties with plastic latch closure – industrial quality
WÜPLAST® countersunk head screw with hexagon socket WN 1423, steel 10.9, zinc-plated, transparent passivated (A3K)
Screw-on fastening base
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Brass spacer stud
Crimping pliers For interchangeable heads