WÜPLAST® countersunk head screw with Z Phillips head WN 1413, A2 austenitic steel
WÜPLAST W1413 stainless steel A2 countersunk Z
SCR-CS-W1413-Z2-A2-5X20
WUEPLAST
Register now and access more than 20,000 products
30° angle
- Reduction of radial stresses
No damage to the screw boss
- Greater flank overlap
Higher pull-out forces
Thread pitch
- High self-locking capacity
Reduced likelihood of connection working loose
- Material preservation
Higher connection load capacity
Recessed core diameter
- No material damage
Improved process reliability
- Low screw-in torques
More secure screw connection
High-quality surfaces
- Chrome (VI)-free surfaces
- High corrosion resistance
WÜPLAST screws only conform to strength class 10.9 as defined in DIN EN ISO 898-1 to a limited extent, since the screw geometry does not allow all requirements to be tested and applied in accordance with the above standard.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 5 mm |
Length (l1) | 20 mm |
Head diameter (dk) | 9.3 mm |
Material | Stainless steel A2 |
Surface | Plain |
Internal drive | Z2 |
Other standard | W1413 |
Head type | Countersunk head |
Thread type | Plastic screw thread |
Last viewed
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Heat-resistant crepe masking tape +120 °C
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Hexagon head bolt with thread up to head ISO 4017, A4-50 stainless steel, plain
Ring-shaped crimp cable lug DIN 46234 and similar
Hexagon Socket Head Cap Screw with low Head DIN 7984, steel 8.8, plain
Cylindrical pin, hardened ISO 8734 steel plain, type A hardened, tolerance class m6
Cylindrical pin, hardened ISO 8734 steel plain, type A hardened, tolerance class m6
Hammer drill bit, Longlife Quadro-L with SDS-plus drill chuck
Ring-shaped crimp cable lug DIN 46234 and similar