WÜPLAST® countersunk head screw with Z cross recess WN 1413, steel 10.9, zinc plated, transparent passivated (A3K)
SCR-CS-W1413-Z1-10.9-(A3K)-2,5X7
Art.-no. 422425 7
EAN 4049557853567
Register now and access more than 20,000 products
30° thread angle
- Reduction of radial stresses
No damage to the screw boss
- Greater flank coverage
Greater pull-out forces
Thread pitch
- High degree of self-locking
The connection is less likely to work itself loose
- Material preservation
Greater load-bearing strength of the connection
Recessed core diameter
- No material damage
Improved process reliability
- Low screw-in torques
Secure screw connection
High-quality surfaces
- Chrome (VI)-free surfaces
- High corrosion resistance
WÜPLAST screws only conform to grade 10.9 as defined in DIN EN ISO 898-1 to a limited extent, since the screw geometry does not allow all requirements to be tested and applied in accordance with the above standard.
Datasheets(X)
 | |
Nominal diameter (d1) | 2.5 mm |
Length (l1) | 7 mm |
Head diameter (dk) | 4.7 mm |
Material | Steel |
Property class | 10.9 |
Surface | Zinc plated |
Internal drive | Z1 |
Other standard | W1413 |
Head type | Countersunk head |
Thread type | Plastic screw thread |
Last viewed
Steel, Zinc Plated, WN 3432, Thick
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Hexagon bolt with thread up to the head ISO 4017, steel 8.8, plain
Complete set for SPANNFIX strapping system 16 mm
Hexagon bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
System box separating element
Electronic labelling device DYMO LabelManager 420P
Single wire seal (SEAL) For uninsulated cable connector
Adhesive cable tie mount ABM1M PA
Hexagon bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain