Warning adhesive tape, non-slip, standard
Hazard warning adhesive tape self-adh. non-slip
HAZDWARNTPE-SA-NONSLP-YELL-BLACK-50MMX6M
Register now and access more than 20,000 products
- Self-adhesive
- For medium to high loads
- Prevents slipping and falling accidents
- With silicone paper
- Meets the requirements of DIN 4844 or DIN EN ISO 7010
- Tape can be driven over by industrial trucks, passenger cars, commercial vehicles, etc. Revolving and turning on the tape should be avoided.
- Yellow-black tape for permanent hazard points and obstacles
- The butyl primer should be used outdoors. This significantly increases the adhesive strength of an adhesive tape on all surfaces.
- The adhesion surface must be dry and free from grease and dust.
Datasheets(X)
Non-slip warning marking for hazard points indoors and outdoors, such as stairs and ramp edges, work areas, lifting platforms, workshop pits, wet areas.
Colour | Yellow-black |
Material | PVC - Polyvinyl chloride |
Adhesive base | Acrylate |
Length | 6 m |
Width | 50 mm |
Thickness | 1 mm |
Shelf life from production/conditions | Unlimited / cool and dry storage area, no exposure to sunlight, 15°C to 25°C |
Last viewed
Clamping plate XI For MacPherson spring strut compressors
Screwdriver PH striking cap with hexagon shank
Pan Head screw with hexalobular head ISO 14583, steel 4.8, zinc-plated, blue passivated (A2K)
Grus S1P safety shoe
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Crimping tool For uninsulated connectors
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
WÜPLAST® pan head screw with flange and Z Phillips head WN 1411, steel 10.9, zinc-plated, transparent passivated (A3K)
Valve seat grinder