Wire cup brush Knotted stainless steel with M14 connecting thread
Braided wire cup brush stainless steel wire
CUPBRSH-AG-KNOTTED-SST-D65XM14MM
Register now and access more than 20,000 products
- Efficient machining of large surfaces with high wear resistance thanks to clockwise knotting on the wire cup brush
- For direct use on angle grinders
- Only the edge tips act on the workpiece. While excessive contact pressure does not improve the result, it does increase the required drive power and reduces the service life of the brush.
- Always wear safety goggles and safety gloves when working with machine brushes!
Datasheets(X)
- Removing slag, rust, scale, concrete residue
- Cleaning welded seams
- Removing varnish and paint
- Preparing metal surfaces before varnishing
 | |
Diameter (D) | 65 mm |
Usable length of wire (H) | 20 mm |
Tool holding device (d) | M14 |
Wire diameter | 0.35 mm |
Material of wire | Stainless steel |
Design | Braided clockwise, Smooth |
Suitable for angle grinder (point system) | 4 of 4 points |
Max. rotation speed | 12500 rpm |
EN standard | 1083-2 |
Last viewed
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Twist drill bit HSS DIN 338 type RN 130°
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Engine sealing compound, Silicone Special 250
Hexagon nut with fine thread DIN 934, steel I8I, zinc-plated, blue passivated (A2K)
Pan Head screw with hexalobular head ISO 14583, A2-70 stainless steel, plain
Locking disc spring washer, shape S Spring steel hardened 420-510 HV10, zinc-flake coated