Wire end brush Stainless steel, knotted, with shank
Spindle-mounted wheel brush/wire end brush, sst
CENTFBRSH-PWRDRL-STAINLESS-D20
Art.-no. 0714692119
EAN 4038898398974
Register now and access more than 20,000 products
- Aggressive effect thanks to knotted wire
- The knots open more or less depending on the speed, and high speeds improve the brushing performance and service life
- PE coating to prevent damage to the workpiece
- For use on die grinders and drills
- The plastic-coated design prevents damage to the component being machined.
- Only the bristle tips act on the workpiece. Excessive contact pressure does not improve the result, but increases the required drive power and reduces the service life of the brush.
- Always wear safety goggles and protective gloves when working with machine brushes!
| Instructions for use (optimising brushing results) | ||||
| Measurement | Peripheral speed | Brush diameter | Wire thickness | Bristle length |
| Increase brushing effect | ↑ | ↑ | ↑ | ↓ |
| Reduce brushing effect | ↓ | ↓ | ↓ | ↑ |
| Brush creates ridge | ↓ | ↑ | ↓ |
| Applications | Peripheral speed [in m/s] | Recommended peripheral speeds for brushing | ||||||
| 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | |
| Deburring | 25 - 35 | |||||||
| Cleaning welding seams | 35 - 45 | |||||||
| Removing scale | 35 - 45 | |||||||
| Polishing | 30 - 40 | |||||||
| Plastic machining | 15 - 25 | |||||||
Datasheets(X)
- Cleaning corners, recesses, holes
- For cleaning moulds/cast parts
- For removing paint and rubber residues
 | |
Diameter (D1) | 20 mm |
Sleeve diameter (D2) | 19 mm |
Usable length of wire (H) | 28 mm |
Wire diameter | 0.25 mm |
Length (L) | 72 mm |
Number of braids | 6 PCS |
Shank diameter (S) | 6 mm |
Material of wire | Stainless steel |
Design | Braided, Plastic covered |
Aggressiveness | Middle |
Suitable for cordless drills (points system) | 2 of 4 points |
Suitable for drill (points system) | 2 of 4 points |
Suitable for straight grinder (point system) | 4 of 4 points |
Max. rotation speed | 20000 1/min |
EN standard | 1083-2 |
Last viewed
Point chisel Plus Longlife & Speed
Hexagon head bolt with thread up to head ISO 4017, A2-50 and A2-70 stainless steel, plain
Threaded piece
Filter screen
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, ≤ M24 A2-70 stainless steel, ≥ M24 A2-50 stainless steel
Universal thread file for UNF thread (NF) and UNC thread (NC)
Hexagon Socket Head Cap Screw with low Head DIN 7984, steel 8.8, plain
Countersunk head screw with hexagon socket ISO 10642, A4-070 stainless steel, plain
Hexagon Socket Head Cap Screw with low Head DIN 7984, steel 8.8, plain
Hexagon socket set screw with truncated cone ISO 4026 A2 stainless steel 21H, plain