pias® drilling screw, hexagon head A2 stainless steel
pias W-214 stainless steel A2 plain hexagon head
SCR-DBIT-HEX-FLG-A2-WS10-6,3X25
ZEBRA PIAS
Register now and access more than 20,000 products
Reduction of the assembly time by the drill tip by min. 50%:
- Drilling without graining
- Thread moulding
- Securing
all in one operation
Suitable for component combinations tI / tII according to approval ETA-10/0184
- ALU/ALU
- Drilling screws must be processed with a suitable drill driver (e.g. cordless drill driver with depth stop)
- The use of impact screwdrivers is not permitted
- Drilling screws must be attached perpendicular to the surface of the component
Datasheets(X)
 | |
Standards | DIN 7504 |
Material | Stainless steel A2 |
Surface | Plain |
RoHS-compliant | Yes |
Head type | Hexagon head |
Drive type | Hexagon |
Thread type | Self-tapping screw thread |
Shape of tip | Drilling tip |
Nominal diameter (d1) | 6.3 mm |
Length (l1) | 25 mm |
External drive (s1) | WS10 |
Last viewed
Foam roller WB ECONOMY For water-based paints
1/2 inch socket wrench insert metric, hexagon, short
Cable sleeve
Raised countersunk head screw with H recessed head DIN 966, steel 4.8, zinc-plated, blue passivated (A2K)
Countersunk screw with hexagon socket, galvanised ISO 10642, steel 10.9, zinc-plated, blue passivated (A2K)
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Hexagon nut, low profile, with clamping piece (non-metal insert) ISO 10511, steel 5, zinc-nickel, silver (ZNSHL)
Refuse bag Without pull tie
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A